JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL SR4735X REV O
PACKAGE
WIRING DIAGRAM
01-08
Technical Manual
JBL SR4735X
SPECIFICATIONS
SYSTEM COMPONENTS:
(Cont’d)
• DC Resistance: 3.2 ohm ±8% Aluminum Wire
• Crossover Network: 129-30015-00
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 7.0V Input, 20 Hz to 20 kHz
B. L.F. Aural Sweep Test: 7.2V Input, 20 Hz to 1.2 kHz
C. M.F. Aural Sweep Test: 4.5V Input, 550 kHz to 20 kHz
D. H.F. Aural Sweep Test: 2.0V Input, 1.0 kHz to 20 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 921mm x 635mm x 460mm D
(36.3 x 25.0 x 18.1 in. D)
• Shipping Weight: 108 lbs. (49 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty 59660
User’s Guide
SR-X Series
981-00052-04
Carton
SR4735X
990-00198-01
Microfoam (8)
Packaging
49790P
Filler, (2)
Top & Bottom
991-00192-00
Network
129-30015-00
SCHEMATIC (129-30015-00)
See Schematic Page
Speaker, High Freq
2425HS
(66923X)
Diaph Repl
D8R2425
Speaker, Mid Freq
M209-8A
(124-28000-02X)
Cone Repl
C8RM209A
Speaker,
Low Freq
2226HPL
Cone Repl
C8R2226
GRN
WHT
YEL
GRN/BLK
WHT/BLK
YEL/BLK
+–
+–
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 8 ohms
• Power Capacity: 600W Continuous Pink Noise
• Frequency Range: 35 Hz – 20 kHz (–10dB)
• Sensitivity: 97 dB SPL, 1 Watt @ 1 Meter
• Crossover Frequencies: 350 Hz and 1.3 kHz
SYSTEM COMPONENTS:
• Cabinet: SR4735X (Not For Sale)
• Grille: 128-00422-00
• Low Frequency 380mm (15 in.) Paper Cone
Transducer: Transducer (2226HPL)
• DC Resistance: 5.0 ohm ±10% Aluminum Wire
• Mid Frequency 203mm (8 in.)
Transducer: Compression Driver (M209A-8)
• DC Resistance: 5.3 ohm ±8% Aluminum Wire
• High Frequency 25.4mm (1in. Exit)
Transducer: Compression Driver (2425HS)
To Next Page
Need help?
General
