1.0
IMPORTANT SAFEGUARDS
FOR AUDIO PRODUCTS
PLEASE READ CAREFULLY
ALL THE FOLLOWING
IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO
YOUR EQUIPMENT
1. Read instructions – All the safety and operat-
ing instructions should be read before the
product is operated.
2. Retain instructions – The safety and operating
instructions should be retained for future
reference.
3. Heed Warnings – All warnings on the product
and in the operating instructions should be
adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
5. Water and Moisture – The product should not
be used near water – for example, near a
bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool,
and the like.
6. Carts and Stands – The product should be
used only if a cart or stand is recommended
by the manufacturer.
6a. A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
7. Wall or Ceiling Mounting – The product should
be mounted on a wall or ceiling only when and
as recommended by the manufacturer.
8. Ventilation – The product should be situated
so that its location or position does not inter-
fere with its proper ventilation. For example,
the product should not be situated on a bed,
sofa, rug, or similar surface that may block
the ventilation openings; or, placed in a
built-in installation, such as a bookcase or
cabinet that may impede the flow of air
through the ventilation openings.
9. Heat – The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products that
produce heat. If placed near an amplifier,
check with the manufacturer for applicability.
10. Power Sources – The product should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the product.
11. Grounding or Polarization – Precautions
should be taken so that the grounding or
polarization means of an product is not
defeated.
12. Power-Cord Protection – Power-supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacles, and
the point where they exit from the product.
13. Cleaning – The product should be cleaned
only as recommended by the manufacturer.
14. Power Lines – An outdoor antenna should be
located away from power lines.
15. Nonuse Periods – the power cord of the
product should be unplugged from the outlet
when left unused for a long period of time.
16. Object and Liquid Entry – Care should be
taken so that the objects do not fall and
liquids are not spilled into the enclosure
through the openings.
2
To Next Page
Need help?
General
