10
JCB-MS-254SB
Instruction & User Manual
Attention: Laser radiation
Do not stare into the beam
Class 2 laser
Protect yourself and your environment
from accidents using suitable precau-
tionary measures!
• Do not look directly into the laser beam
with unprotected eyes.
• Never look into the path of the beam.
• Never point the laser beam towards
reflecting surfaces and persons or animals.
Even a laser beam with a low output can
cause damage to the eyes.
• Caution - methods other than those
specified here can result in dangerous
radiation exposure.
• Never open the laser module. Unexpected
exposure to the beam can occur.
• If the mitre saw is not used for an extended
period of time, the batteries should be
removed.
• The laser may not be replaced with a
different type of laser.
• Repairs of the laser may only be carried out
by the laser manufacturer or an authorised
representative.
To Next Page
Loading...
Need help?
General
