LPG TLT
QUICK REFERENCE GUIDE
This Quick Reference Guide DOES NOT replace the Operators
Manual. You MUST read ALL the disclaimers and safety and other
instructions in the Operators Manual before initially operating this
product. Accordingly, no legal claims can be entertained based on
the data, illustrations or descriptions in this Quick Reference Guide.
Access additional information
www.servicepro.jcb.com
Instrument Panel
Static Dimensions
Cab and Switch Panel
A. Steering wheel
B. Lift arm controls
C. Coolant temperature gauge
D. Instrument panel
E. Console switches
F. Seat
G. Accelerator pedal
H. Inching pedal
J. Transmission drive lever
Start Up Sequence
Transmission Drive Lever
A. Lever
B. Twist grip
C. Front differential indicator lamp
BEST PRACTICES
1. Carry a load as low as possible while maintaining good
visibility.
2. Forks should be tilted back when in transport – with or
without a load, cradle the load.
3. Fork tips should be on the ground when unit is parked.
A. Amber warning
B. Critical stop (red)
C. Engine coolant temperature (red)
D. Not used
E. Transmission oil temperature (red)
F. Engine oil pressure (red)
G. Alternator charge (red)
H. Park brake (red)
J. Air filter blocked
K. Hydraulic filter
L. Seat switch
M. Hour meter / time to service / service due / fault code display
Coolant Temperature Gauge
A. 211.9 °F – Warning lamp on
B. 220.9 °F – Reduced engine power
C. 229.8 °F – Critical stop lamp
illuminates. Further reduction in
the engine power
Moving Machine
A. Securing method
A. Lifting point x 4
B. Padding
Lifting Machine
Tie-Down Points
Static Dimensions
Revision 1.0
1/6/2021
To Next Page
Need help?
General
