EasyManuals Logo
Home>Jensen>Car Receiver>CM715K

Jensen CM715K User Manual

Jensen CM715K
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
How to Install the CM715K AM/FM
Stereo Receiver/Cassette Tape
Player/CD Player
Installation............................. 2
Before You Begin Installation ..... 2
Tools and Supplies Needed ....... 2
Speaker Requirements .............. 2
Prepare Radio for
Installation .................................. 2
Adapters for Easier
Installation .................................. 2
Connections ........................ 3
Crimp Connections ............. 3
Upgrading your System ...... 3
Disconnect Battery ..................... 4
Remove Old Radio ..................... 4
Wiring....................................... 5
Fuse Adapters..................... 5
Wiring with a Wiring Adapter ...... 6
Connect Wires............................ 6
Wiring Color Codes .................... 6
Attach Wires to Radio ................ 6
Install Wiring Inside the Car ....... 6
Wiring Diagram–Advanced
Installation .................................. 7
Testing .................................... 8
Reconnect Battery...................... 8
Test Power Wiring ...................... 8
View/Set the Clock ..................... 8
Test Antenna Connection ........... 8
Test Memory Wiring ................... 8
Test Speaker Connections ......... 9
Balance ............................... 9
Fader .................................. 9
Attach Brackets ........................ 10
GM .................................... 10
Dodge/Chrysler/Plymouth .. 11
Jeep Grand Cherokee,
Dodge Avenger,
Plymouth Sebring ............. 11
Troubleshooting ................ 12
Reset Button ............................ 12
Specifications
and Warranty...................... 13
Contents
Technical Assistance
For technical assistance with the installation of the
CM715K, call 1-800-323-0221.
Installation
Welcome!
What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this book
clear and easy to follow.
For your Jensen stereo to work right, it must be installed
correctly. This manual will show you how to install your new
stereo like a pro. It's a good idea to read all of these instruc-
tions before you begin the installation. Most installations are
straightforward and can be handled by a do-it-yourselfer with
the right tools, patience, and the ability to follow instructions.
But, do-it-yourself installation isn't for everyone. If you still
don't feel confident after reading this book, consider turning
the installation job over to someone better suited to it.
Warranty Service
If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt
with the product.
®
VOL
VOL
C
O
M
P
A
C
T
DIGITAL AUDIO
®
4 X 50W CD/CASSETTE
INSTALOC II TUNER
CDC CONTROLLERCM715K
SCN
RPT
RPT
A-B
3
MEM
CLR
6
2
RDM
4
PGM
5
1
CDC
BAND
TAPE
SEL
DISC
PWR
A.PS
CD
LOUDDISP MUTE
PROG
MO
RESET
Untitled-3 4/10/99, 7:38 PM1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jensen CM715K and is the answer not in the manual?

Jensen CM715K Specifications

CD Player IconCD Player
signal-to-noise ratio>86 dB
frequency response20 Hz - 20 kHz
channel separation>65 dB
Tape Player IconTape Player
frequency response±3 dB, 50 Hz-15 kHz
wow and flutter0.13% JIS
signal-to-noise ratio (a-weighted)65 dB
FM Tuner IconFM Tuner
tuning range87.5 MHz-107.9 MHz
FM mono sensitivity12 dBf
50 dB quieting sensitivity (stereo)16 dBf
AM Tuner IconAM Tuner
tuning range530 kHz-1720 kHz
Amplifier IconAmplifier
total system power160 watts peak
power output (front)2 x 40W
power output (rear)2 x 40W
General IconGeneral
power supply11-16 VDC, negative ground
speaker output impedance4-8 Ohms
fusesfast blow AGC (2 amp and 10 amp)

Related product manuals