JLab Talk User Manual

Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
RECORDING
SETTING
BOTTOM
CONTROLS
MUTE ON / OFF
& RECORD
SWITCH
VOLUME / GAIN
CONTROL
CARDIOID
Record front
OMNI
Record all
surroundings
STEREO
Record left &
right channel
BIDIRECTIONAL
Record front &
back channel
3.5MM AUX
OUTPUT
USB-C INPUT
Press to switch
volume or gain.
Rotate wheel to
control the level.
Press to
mute/unmute.
IN USE
Correct
position
Incorrect
position
• The Talk works with almost any recording software installed on macOS, Windows, or Linux.
Review in your software’s setting and adjust accordingly.
• No additional drivers/software are needed for the Talk. Simply plug in and setup in device settings.
• Talk will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
JLAB.COM

JLab Talk Specifications

General

Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Volume control	Rotary
Microphone mute	Yes
Microphone frequency	20 - 20000 Hz
Microphone sensitivity	120 dB
Microphone direction type	Cardioid/Omnidirectional microphone
Device interface	USB
USB connector type	USB Type-C
Connectivity technology	Wired
Latency	0
Cable length	2 m
Mounting type	Table
Product color	Black
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey, Mac OS X 13.0 Ventura
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Cables included	USB Type-A to USB Type-C
Number of products included	1 pc(s)

Weight and Dimensions

Depth	63 mm
Width	70 mm
Height	135 mm
Microphone weight	215 g
Dimensions (W x D x H) with stand	195 x 195 x 235 mm