Table 1: Electrical Ratings
Motor Ratings 120 V 208 V 240 V 277 V
AC Full Load Amperes 6.0 3.5 3.0 -
36.0 21.0 18.0 -
Non-inductive Amperes 10.0 9.2 8.0 7.2
Pilot Duty—125 VA 24 to 277 VAC
Note: When used as a two-circuit switch, the total connected load must not exceed 2,000 VA.
Technical Data
Product T25 Two-Stage Room Thermostat
Output Single Pole, Double Throw (SPDT)
Two Enclosed Pennswitches
Cover Cold Rolled Steel with “Tawny Silver” Finish
Differential (Mechanical) Each Stage 0.7F° (0.4C°) Approximately
Between Stages 3F° (1.7C°) Non-Adjustable
Supply Voltage 24 V, 120 V, 208 V, 240 V, 277 V
Mounting With Adaptor Plate for Wall or Electrical Box Mounting; Vertical
Mounting Only
Range Thermostat 40 to 90°F (5 to 32°C)
Thermometer 50 to 90°F (10 to 32°C)
Sensing Element Liquid Charged, No Leveling Required
Shipping Weight Individual Pack 1.5 lbs (0.7 kg)
Overpack of
32 lbs (14.5 kg)
Terminals Screw Type. Color Coded:
Red is Common.
Red Closes to Yellow on Temperature Rise.
Red Closes to Blue on Temperature Drop.
Thermometer Bimetal
Agency Listings UL Listed; File E6688, CCN XAPX (U.S.), CCN XAPX7 (Canada)
CSA Certified; File LR948, Class 4813 02
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
507 E. Michigan Street, Milwaukee, WI 53202
® Johnson Controls and PENN are registered trademarks of Johnson Controls, Inc. in the
United States of America and/or other countries. All other trademarks used herein are the property
of their respective owners. © Copyright 2014 by Johnson Controls, Inc. All rights reserved.
6 T25 Two-Stage Room Thermostat Installation Instructions
To Previous Page
Loading...
Need help?
General
