22 - Engine Starting
Move tilt/run lever to RUN position. Place motor in
its normal operating position.
1. RUN position
Be sure:
• Engine is in normal operating position.
• Fuel hose primer bulb is firm.
• Shift lever is in NEUTRAL.
•
Twist-Grip
throttle is at START.
Pull latch and remove engine cover.
Electric Start Models
Follow the procedures in Manual Start Models.
Manual Start Models
Remove three screws that secure the manual start-
er.
1. Screws
1
WARNING
DO NOT use jumper cables and a booster
battery to start engine. Do not charge a bat-
tery in the boat with an external charger.
Fumes vented during either operation can
lead to an explosion.
1
To Next Page
Loading...
Need help?
General
