– 84 –
7-2. Adjusting the needle thread presser device
The needle thread presser device is able to tuck the
needle thread on the wrong side of material as in the
case of the conventional wiper device.
[Feature]
• So-called "bird's nest phenomenon" which appears
on the wrong side of material can be reduced by
using needle thread presser device ① in combina-
tion with condensation stitching.
• Operability around the needle entry point is im-
proved.
• Applicability of various kinds of attachments de-
signed for use around the needle entry point is
improved.
2) Press ❸ or ❹.
( ❹ will be placed in ON.)
3) Press ❷ to conrm the setting. Then,
the sewing screen is displayed.
[How to set up the needle thread presser
device]
1) Press ❶.
In the case the memory switch "U056 Reverse-rotation needle-up after thread trimming"
is enabled, the length of needle thread becomes longer. So, in this case, the needle thread
presser device should be set to "OFF".
①
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❷
❶
❹
❸
To Next Page
Need help?
General
