109
Message catalog
Message
Cause (Reason to display such messages)
English Pictograph
1
A. When “start/stop”, “reverse stitch” or “thread-trimming”
button is pressed while the presser foot is raised.
B. When presser foot is raised while sewing.
2
Same as the left
A. When one of the buttonhole stitches is selected and the
buttonhole sensor pin is not connected, the machine
starts to sew.
3
Same as the left
A. When a stitch pattern other than buttonholes is selected
but the buttonhole sensor pin is connected, the machine
starts to sew.
4
A. When in the mode, user attempts to select stitch
patterns more than the maximum number of memory
(70).
5
A. When in the mode and more than one stitch pat-
tern is selected, user attempts to move to mode
and/or .
B. When in the mode and more than one stitch pat-
tern is selected, user presses the button for
more than two seconds (deleting all).
6
A. When the process of saving a pattern into folder is com-
pleted.
7
A. When in the option setting, settings which will be kept
after turning off the machines are changed. (Thread
trimming by foot controller, LCD contrast, buzzer volume
and language setting)
8
A. When the setting of the machine is changed to twin nee-
dle sewing (option setting).
9
A. When in twin needle sewing, a stitch pattern other than
twin needle sewing is selected.
To Next Page
Need help?
General
