−1 −
1. SPECIFICATIONS
Model
Stitch width (max.)
Length of buttonhole
(length of knife)
Stitch length (max.)
1 Sewing speed
2 Needle
3 Needle bar stroke
4 Thread take-up lever
5 Hook
6 Lift of work clamp check
7 Bobbin winder
8 Feed drive method
9 Dimensions
10 Weight of machine head
11
Adjustment of needle thread
12
Data that can be stored in memory
13 Bar-tacking shape
14
Change-over of 1/2 stitching
15
Input voltage classification
16 Motor
17 Lubrication method
18 Lubricating oil
When presser type 1 is used
4 mm
6.4 to 19.1 mm
(1/4" to 3/4")
25 mm
When presser type 3 is used
5 mm
6.4 to 31.8 mm
(1/4" to 1-1/4")
41 mm
LBH-1700
LBH-1702
5 mm
6.4 to 25.4 mm
(1/4" to 1")
35 mm
Standard 3,000 rpm (Number of revolution can be controlled.) Max. 3,600 rpm
DP X 5J (SCHMETZ 134R)
34.6 mm
Link thread take-up lever
DP type full-rotary automatic lubricating hook
12 mm
Built-in machine head type
Drive by stepping motor, rack and pinion
Width of machine bed : 185 mm
Height (from table top surface to top end of top cover) : 364 mm
Length (from front end of machine bed to rear end of motor cover) : 630 mm
50 kg
Active tension method
Digital setting for each section by means of operation panel (Parallel section tension,
bar-tacking section tension)
Max. 89 patterns
Square shape, radial shape, round shape (selection by operation panel)
Radial taper bar, Radial straight bar
Each pattern can be set.
Domestic : 1ø 100V/ 3ø 200V
Export : 1ø 100 to 240V 1ø 220 to 415V
3ø 200 to 240V 3ø 220 to 415V
Compact AC servo motor 450W
Direct-drive method
Automatic lubrication method
JUKI New Defrix oil No.1 (Equivalent to ISO VG7)
When presser type 2 is used
5 mm
6.4 to 25.4 mm
(1/4" to 1")
35 mm
To Next Page
Need help?
General
