−
4
−
2.Needleandthread
Needle and thread will vary in accordance with the sewing
conditions. When using the needle and the thread, select
them referring to the left table. Cotton thread and spun thread
are recommended.
III. INSTALLATION OF THE SEWING MACHINE AND PREPARATION OF THE
OPERATION
As for the descriptions other than those described in the following items, refer to the Instruction Manual for the LK-1900B.
1.Installationofthetableandstand
(Caution) 1. Besuretoinstallthetableandstandonaatplace.
2. After the installation,besure to fixthetable and standbylocking the castersoradjustingthe
adjuster.
3. Whenadjustingtheheightofthetable,performtheworkbytwopersonsormoresoasnottodrop
thetable.
Needle Needle thread Bobbin thread
#60 #80
#50 #60
#40 #60
#60 #60
DP x 17 #14
WARNING :
Turn OFF the power before starting the work so asto prevent accidents caused by abrupt start of the
sewingmachine.
3.Attachingtheneedle
To attach the needle, loosen screw
, insert needle
fully
into the needle bar hole with the long groove facing toward
you, then tighten screw
.
WARNING :
Turn OFF the power before starting the work so asto prevent accidents caused by abrupt start of the
sewingmachine.
To Next Page
Loading...
Need help?
General
