LU-2216N-7 (1-needle)
LU-2266N-7 (2-needle)
LU-2266N-7-0B/XC-E500
(XC-E500 operation panel is optionally available.)
Long-arm, Unison-feed, Lockstitch Machine
with Vertical-axis Large Hook and Automatic Thread Trimmer
Based on the market-proven design of the LU-2210N-7 and -2260N-7 Series, the LU-2216N-7/-2266N-7 are
developed with a longer distance from the machine arm to needle ... a full 650mm. The long arm unison-
feed lockstitch machine with vertical-axis large hook with automatic thread trimmer is best-suited to
processes that require a longer distance from the machine arm to needle, such as reinforcement stitching
and topstitching in tape attachment processes for sewing furniture or car seats.
The machine runs at a top sewing speed of 3,000rpm, sharply increasing productivity. The machine also
adopts a fully automatic lubricating method, as well as a DL device that increases the lift of the presser
foot and lets the user adjust the alternating vertical movement of the walking foot and presser foot by a
simple, one-touch operation. The result is improved maintainability and operability.
To Next Page
Need help?
General
