JUKI SC-510 User Manual

ENGLISH
– 19 –
4) When you want to advance the setting No., press
switch
2
to advance the setting No.
When you want to return the setting No., press
switch
1
to return the setting No.
(Caution) When switch
1
(switch
2
) is held press-
ing, the setting No. will return (will ad-
vance) continuously. When the setting No.
is advanced (returned), the contents which
are before by one (after by one) will be
determined. So, be careful when changing
the contents (up/down switch is touched).
5) When the change has been completed, press
switch
1
or
2
to specify the changed value.
(Caution) 1. When turning OFF the power before
performing this work, the contents which
have been changed are not updated.
2. Press switch
1
, and screen display will
change to the contents of the setting No.
which is before by one.
3.
Press switch
2
, and screen display will
change to the contents of next setting
No. After completing the operation, turn
OFF the power and turn ON the power
again to return to the normal operation.
After completing the operation, turn OFF the power
and turn ON the power again to return to the normal
operation.
Specied
No.
EXAMPLE) CHANGING THE FLICKER REDUC-
ING FUNCTION (SETTING No. 5)
Press switch
5
to set the setting No. to "5". Existing
set value is displayed in LED
5
. (Standard is "0".)
Press switch
4
three times to change to “3”.
(Caution) Keep pressing switch
4
or switch
3
, and
the setting vaue can be changed continu-
ously.
5
2
1
2
1
4
3
5
2
1
4
3

JUKI SC-510 Specifications

General

Brand	JUKI
Model	SC-510
Category	Sewing Machine
Language	English