Smart Control 5
06.12.20193 / 30024020101
Changing the default application
• Select menu “Settings“ in the sidebar.
• Select submenu “Application Menu“.
App overview is shown.
• Select default application and conrm with “Save”.
Default application is changed.
i The visibility of apps can be changed with the eye symbol.
Changing the screen saver
• Select menu “Settings“ in the sidebar.
• Select submenu “General Settings“.
• Select submenu “Display“.
• Select “Daydream“.
Available screen savers are shown.
• Select screen saver and congure it, if necessary.
Screen saver is changed.
i The time to the sleep of the display can be set in the app bar at the top.
Updating the rmware
Requirement: Internet connection
• Select menu “Settings“in the sidebar.
• Select submenu “System Update“.
Firmware is updating.
6 Technical data
Rated voltage DC 24 V SELV
Rated power < 1,5 W
Screen diagonal 127 mm / 5″
Resolution 720 x 1280
Frame dimensions (W x H) 81 x 132 mm
Power supply PoE (Power over Ethernet)
acc. to IEEE 802.3af or
DC 24 V via external power supply
(not included)
Processor Cortex-A53
Ambient temperature 0 ... +30 °C
7 Accessories
Power supply
ush-mounted NT 2405 VDC
for rail mounting NT 2415 REG VDC
8 Warranty
The warranty follows about the specialty store in between the legal framework as provided for by law.