EasyManuals Logo

Jura IMPRESSA F90 User Manual

Jura IMPRESSA F90
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Press symbol until the following message is displayed:
WATER HARDNESS 3
Press symbol , you will hear an acoustic signal and the
hardness degree flashes.
Now, press symbols to adjust the required hardness
degree.
Press symbol to confirm the new settings.
WATER HARDNESS 4
Press programming key to leave Programming Mode.
PLEASE SELECT
6. Installation of CLARIS plus filter cartridges
If the CLARIS plus filter cartridge is installed properly, de-
scaling of the coffee machine is no longer required. For
more information on the CLARIS plus filter cartridge refer
to brochure «CLARIS plus». Hard on limescale. Gentle on
your coffee machine.»
6.1 Installing the filter
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Fold up the cartridge holder. Insert the filter cartridge in the
water tank (Fig. 4)
Close the cartridge holder until it engages audibly.
Fill the water tank with cold, fresh tap water and install it again.
Press Programming key until you hear an acoustic signal.
NO FILTER
Press symbol , NO flashes on the display.
Press symbol until the following message is displayed:
FILTER YES (YES flashes)
Press symbol .
INSTALL FILTER / WATER PORTION
Turn the selector switch of the Professional Cappuccino Frother
(14) to the steam position (Fig. 18).
Place a sufficiently large receptacle (at least 0.5 litre) under the
Professional Cappuccino Frother (14) and press the water portion
draw-off key .
FILTER RINSING. The water draw-off operation is
stopped automatically.
MACHINE HEATING UP
PLEASE SELECT
Now you have activated the filter. In Programming Mode the
water hardness selection function is no longer displayed.
6.2 Replacing the filter
After 50 litres of water the filter cartridge will need to be
replaced. The display will prompt you to change the filter.
Please monitor the period of use of the CLARIS plus filter
cartridge (max. 2 months) using the scale on the cartridge
holder by the water tank.
REPLACE FILTER / PLEASE SELECT
Use the key to switch off the coffee machine.
GOOD BYE
Press maintenance key for some seconds, with the machine
switched off.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jura IMPRESSA F90 and is the answer not in the manual?

Jura IMPRESSA F90 Specifications

General IconGeneral
TypeAutomatic Coffee Machine
ManufacturerJura
ModelIMPRESSA F90
ColorSilver/Black
Pump Pressure15 bar
Power1450 watts
DisplayYes
Adjustable Coffee StrengthYes
Adjustable Water AmountYes
Integrated GrinderYes
ProgrammableYes
Number of Coffee Spouts2
Milk FrotherYes
Hot Water FunctionYes
Pre-Brew Aroma SystemYes
Descaling AlertYes
Cleaning AlertYes
Energy Saving ModeYes
Bean Container Capacity200 grams
Voltage230 V
Water Tank Capacity1.9 liters

Related product manuals