JVC ca-mx55mbk User Manual

CA-MX55MBK |
Recording
CD
Tracks
in
Programmed-Edit
Mode
You
can
make
your
favorite
selections
from
6
CD
and
record
them
on
cassette.
1.
insert the cassette for recording in deck B.
When
you
want
to
record
both
sides
of
a
cassette,
select
reverse
mode
by pressing the REV. MODE button so the indicator lights.
. Set the magazine.
Press
the
STOP/CANCEL
button
on
the
CD
Automatic
Changer.
.
Press
the
EDIT
button
on
the
CD
Automatic
Changerand
select
the
Programmed Edit mode.
The P. EDIT indicator lights.
Eorr
Ca]
.
Enter
the
length
of
the
tape
to
be
recorded
using
the
+10
and
+1
buttons.
[TIME neg
+10 +1
For
example:
To
set
a
period
of
46
minutes,
press
the
+10
button
four times and press the +1 button six times.
. Press the SIDE A/B button.
SIDEAB
This
tells
the
system
that
you
will
be
choosing
tracks
to
be
recorded
on
side
A
of
the
tape.
;
The
length
of
time
for
one
side
of
the
tape
is
displayed.
This
is
half
of
the
total
tape
length.
The
total
time
for
the
tracks
you
choose
for
each
side
cannot
exceed
this
time.
Ifyou
do
notpress
the
SIDE
A/B
button,
side
Ais
automatically
selected.
. Press the Disc button and specify the Disc No. of the disc
containing the track to be recorded.
1 2
Oo O
3 4
Oo oO
5 6
oO O
If
you
use
the
Remote
Controller,
press
the
CD
CHANGER
button
and
then specify one of 1 to 6 with a numeric key.
; 1 2 3
ef OO
4 5 6
Ce) Cel
To
change
the
disc,
specify
the
Disc
No.
of
another
disc
again.
.
Press
the
4
or
PPI
button
and
select
the
track
to
be
recorded.
if
you
use
the
Remote
Controller,
press
the
CD
10KEY
button,
then
specify
a
track
with
a
numeric
key.
:
CD 10KEY : S
Cc — bet
CI
CONTINUE _PRGM
Ce
18
20 (No. 20342)
9. Press the MEMORY button on the CD Automatic Changer.
MEMORY
oa
¢ Upto 16 tracks can be allocated for each side of the cassette.
+ if the length of a track exceeds the remaining tape length, the time
indication blinks on the display. Choose a different track number.
¢ To delete a track from the program, press the CALL button to display
the track to be deleted. Press the STOP/CANCEL button on the CD
Automatic Changer.
10. If you also want to record on the other side of the tape, press the
SIDE A/B button and repeat steps 7-9.
SIDE AB
* Tocheck the Programmed Edit contents, press the CALL button. Each
time you press the button, the track and step of the displayed side are
shown on the display.
To modify a track in the program, press the CALL button, and call the
track to be modified. Select a new Disc No. and track, then press the
MEMORY buiton.
11.Press the CD DIRECT REC button on the Tape Deck.
CO DIRECT REC
* The tape is automatically rewound to the beginning of side A, and then
recording begins.
« When the Tape Deck is set in the reverse mode, after the last track is
recorded on side A, the tape deck high-speed-erases to the end of side
A. Then it changes direction to side B and begins recording the
remaining tracks.
* To stop recording, press the Stop lM button on deck B, or press the
STOP/CANCEL button on the CD Automatic Changer.
To cancel the Programmed-Edit mode, press the STOP/CANCEL button
on the CD Automatic Changer, then press the PLAY MODE button.
Note:
* The program cannot be edited during recording. To modify the
program, cancel the Programmed-Edit mode, and perform step 4 and
subsequent steps.
Note:
* During recording the Programmed-Edit mode, do not operate the GD
Automatic Changer.
Creating a Blank During Recording
Use the Record Muting function when you do not want to record a section
of the source. .
1. Press the REC/REC MUTE button onthe Tape Deck at the beginning
of the section you don’t want to record.
ad 0...
Ablank of about 4 seconds is created on the cassette, and then the deck
pauses.
2. To start recording again, press the <j or [> button.
* To create a blank of more than 4 seconds, hold down the REC.REC
MUTE button. When you release this button, the deck pauses.
« When the source you are recording from is the CD Automatic Changer
and the CD DIRECT REC button is used, the REC/ REC MUTE button
will not function.
¢ The Remote Controller REC button dose not have the REC MUTE
function.

JVC ca-mx55mbk Specifications

General

Brand	JVC
Model	ca-mx55mbk
Category	CD Player
Language	English