1-2 (No.MA252)
SPECIFICATION
Design and specifi cations are subject to change without notice.
Type Closed Active Subwoofer (Built-in amplifi er)
Speaker Unit 14 cm (5-9/16 in.) cone
Input Terminal LINE IN (1 system), 0.19 V/25 kΩ
SPEAKER (1 system), 3.7 V
Power Output 32 W RMS x 2 channels at 2 Ω and [< or =] 1% THD + N
Signal-to-Noise Ratio 75 dBA (reference: 1 W into 2 Ω)
Maximum Amplifi er Power Output 60 W + 60 W (Impedance 2 Ω + 2 Ω )
Cut-off Frequency 110 Hz (L.P.F. switch "ON", -12 dB/oct low pass fi lter)
Crossover Frequency 20 Hz to 200 Hz (L.P.F. switch "ON")
20 Hz to 500 Hz (L.P.F. switch "OFF")
Sound Pressure Level 88 dB/ m (with line input: 0.03 V)
Level Control -50 dB to 0 dB (Center) to + 10 dB
Power Requirement DC 14.4 V (11 V to 16 V allowance), Negative ground
Dimensions (W/H/D) 290 mm × 60.5 mm × 200 mm (11-7/16 in. × 2-7/16 in. × 7-7/8 in.)
Mass 2.1 kg (4.7lbs) (Excluding accessories)