5
English
CAUTION: Make all connections before plugging the System into an AC power outlet.
Connect an (optional) signal cord between the AUX terminals on the System and the output terminals of your auxiliary equipment, (e.g. turn-
table). You can listen to this source.
Unplug the cap and connect an (optional) optical digital cord between the System’s OPTICAL DIGITAL OUT terminal and the input terminal
of the MD recorder, etc.
You can record the digital output signal from the System’s CD Player to the MD recorder, etc.
Connect an (optional) signal cord between the SUB WOOFER OUT terminal and an external JVC subwoofer system, etc.
Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.
The provided AC power cord for this unit has certain one-way direction connections to prevent electric shock. Refer to the illustration for correct
connection.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAM-
AGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYS-
TEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!
Connecting Auxiliary Equipment
Connecting an MD Recorder, etc (Digital Output)
Connecting a Subwoofer System
Connecting the AC Power Cord
R
L
AUX
Turntable (with built-in equalizer)
(optional)
Signal cord (optional)
Pin-plug x 2
Pin-plug x 2
OPTICAL
DIGITAL
OUT
MD recorder, etc. (optional)
Cap
Optical digital cord (optional)
SUB
WOOFER
OUT
Subwoofer system (optional)
Signal cord (optional)
AC IN
Power cord
To Next Page
Loading...
Need help?
General
