EN17
MULTI-9
Multi-Analyzer 9
FULL
Snapshot mode
with no frame*
FRAME
Snapshot mode
with frame*
MULTI-4
Multi-Analyzer 4
* There is the sound effect of a shutter closing.
PIN-UP
Pin-Up mode*
NOTES:
●
Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom.
●
If Snapshot recording is not possible, “PHOTO” blinks
when SNAPSHOT is pressed.
●
If Program AE with special effects (
pg. 28) is
engaged, certain modes of Program AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
●
If SNAPSHOT is pressed when “DIS” is set to “ON”
(
pg. 24), the Stabilizer will be disabled.
●
During playback as well, all Snapshot modes are
available. The shutter sound is not heard.
●
During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.
●
When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.
●
will appear while the snapshot is being taken.
To Next Page
Loading...
Need help?
General
