Follow these steps to setup GY-HM200 / GY-LS300 streaming to Ustream:
1. Select recording format to enable network / streaming.
2. Plug USB adapter, enable camera network function and connect to Wi-Fi (LAN) network.
3. Verify camera’s IP Address by pressing Status button.
4. Using PC/Mac browser, type camera’s IP Address to access Settings and Remote page.
5. Find RTMP URL and Stream Key from your Ustream account.
6. Copy and paste these values into camera’s Streaming / RTMP settings and click Save.
7. Assign one of User Buttons to Stream function. Example: User 7, next to Zoom control
Camera controls to be used during setup:
• Menu button and Joystick for navigation
• User 3 button to confirm Recording Format changes
• Status button to verify camera’s IP Address and connection information
To Next Page
Loading...
Need help?
General
