JVC GZ-MS90 User Manual

7
ENGLISH
3
Firmly insert the card with its clipped
edge first.
4
Close the SD card cover.
L
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
NOTES
•
Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
•
Do not touch the terminal on the reverse
side of the label.
MEMORY CARD ERROR!
Turn off the camcorder. Remove the
SD card and insert it again. Turn on the
camcorder. If the error message appears
again, replace the card with one that is
confirmed to operate correctly.
Format an SD card when using it for
the first time
This will also ensure stable speed and
operation when accessing the SD card.
Select [FORMAT SD CARD] from the
MENU.
Date/Time Setting
1
Open the LCD monitor to turn on
the camcorder.
2
When [SET DATE/TIME!] appears,
select [YES] within 10 seconds.
SET DATE/TIME!
YES
NO
If you do not select within 10 seconds,
the screen disappears. In such case,
press the power button ( ) and turn the
camcorder on again.
3
Set the date and time.
Repeat this step to input the day, month,
year, hour and minute.
L
To change the date and time
1) Touch the
MENU button.
2) Select [BASIC SETTINGS], and then
[CLOCK ADJUST].
L
To return to the previous screen
Select
@
.
L
To quit the screen
Touch the MENU button.
Bottom of the
Camcorder
Clipped
Edge
(Z pg. 4)
(Z pg. 4)

JVC GZ-MS90 Specifications

General

Brand	JVC
Model	GZ-MS90
Category	Camcorder
Language	English