2
Fuse block
Ignition switch
Vehicle-specific Wiring Harness
(separately purchased)
For your reference:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
Extension lead *
1
Remote lead
10 A fuse
DAB aerial input (SMB connector) *4
*
1
Not supplied for this unit.
*
2
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint.
*
3
Make the <L/O MODE> setting accordingly, see page 18 of the INSTRUCTIONS.
*
4
If you connect the DAB aerial with booster, this unit can supply the power to the DAB aerial (see page 19 of the INSTRUCTIONS).
ELECTRICAL CONNECTIONS
JVC Amplifier
Recommended connection
Connecting the Bluetooth adapter or portable audio player
To the brown lead of the supplied power cord
E
To the blue (white stripe) lead of the supplied power cord
E
Ground
E
Power cord
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – or – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
KS-BTA100
(separately purchased)
Portable audio player, etc. *
1
3.5 mm stereo mini plug. *
1
Make the <SRC SELECT> setting accordingly, see
pages 9, 15, and 18 of the INSTRUCTIONS.
If your vehicle factory wiring harness does not
have “12 V ignition switch” lead, connect the
red lead of the supplied power cord,
E
, to the
vehicle fuse block (through a separate red lead
provided with the fuse tap).
Power cannot be turned on?
Separate red lead
Caution
Remote adapter *
1
Blue (yellow stripe)
Signal cord *
1
Reset the unit
Factory wiring harness (vehicle)
Join the same color leads together.
To join the open-ends of the leads :
Strip lead ends
Twist ends together
Solder
Tape
Amp Turn-on (200 mA max.)
12 V Ignition Switch
12 V Battery
Ground
Illumination
Telephone Muting
Automatic antenna (250 mA max.)
Front speaker (left)
Front speaker (right)
Rear speaker (left)
Rear speaker (right)
Black
Blue
Yellow
Red
Orange (white stripe)
Brown
Blue (white stripe)
White
White (black stripe)
Gray
Gray (black stripe)
Green
Green (black stripe)
Purple
Purple (black stripe)
Black
Blue (white stripe)
Brown
FRONT : To front speakers
REAR : To rear speakers or subwoofer *3
Aerial input ( for FM/AM)
Rear ground terminal
Install_KD-DB56_002B.indd 2Install_KD-DB56_002B.indd 2 8/10/2011 9:51:53 AM8/10/2011 9:51:53 AM
To Previous Page
Loading...
Need help?
General
