JVC KD-DV4206 User Manual

ENGLISH
28
On-screen guide icons
During playback, the following guide icons
may appear for a while on the monitor.
DVD: Appears at the beginning of a scene
containing:
: Multi-subtitle languages
: Multi-audio languages
: Multi-angle views
: Playback
: Pause
: DVD/VCD: Forward slow motion
: DVD: Reverse slow motion
: Forward search
: Reverse search
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the
setup menu (see page 22).
DIGITAL AUDIO OUTPUT
Output Signals
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
DVD 48 kHz, 16/20/24 bits Linear PCM
48 kHz, 16 bits stereo Linear PCM
96 kHz, Linear PCM
with DTS DTS bitstream 48 kHz, 16 bits stereo Linear PCM
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bits stereo
Linear PCM
with MPEG Audio MPEG bitstream 48 kHz, 16 bits Linear PCM
Audio CD, Video CD 44.1 kHz, 16 bits stereo Linear PCM/48 kHz, 16 bits stereo Linear PCM
Audio CD with DTS DTS bitstream 44.1 kHz, 16 bits stereo Linear PCM
MP3/WMA 32/44.1/48 kHz, 16 bits Linear PCM
About sounds reproduced through the rear
terminals
• Through the analog terminals (Speaker
out/LINE OUT): 2-channel signal is
emitted. When playing a multi-channel
encoded disc, multi-channel signals are
downmixed. (AUDIO—DOWN MIX: see
page 22.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital,
DTS, MPEG Audio) are emitted through
this terminal. (For more details, see table
below.)
To reproduce multi-channel sounds
such as Dolby Digital and DTS, connect
an amplifier or a decoder compatible
with these multi-channel sources to this
terminal, and set “DIGITAL AUDIO
OUTPUT” correctly. (See page 22.)
EN26-33_KD-DV4206_001A_3.indd 28EN26-33_KD-DV4206_001A_3.indd 28 12/10/05 2:16:40 PM12/10/05 2:16:40 PM

JVC KD-DV4206 Specifications

General

Brand	JVC
Model	KD-DV4206
Category	Car Stereo System
Language	English