5INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 24.
1
Turn on the power.
2
Enter the PSM settings.
3
Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK HOUR,” then adjust the hour.
Select “CLOCK MIN” (minute), then adjust the minute.
4
Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information
Indication language:
In this manual, English indications are used for purposes of explanation. You can select the indication language
on the monitor on the “LANGUAGE” setting (see page 26).
Detaching the control panel Attaching the control panel
EN02-05_DV4406_005A_f.indd 5EN02-05_DV4406_005A_f.indd 5 12/4/07 6:37:26 PM12/4/07 6:37:26 PM
To Next Page
Loading...
Need help?
General
