EasyManuals Logo
Home>JVC>Car Receiver>KD-G521

JVC KD-G521 User Manual

JVC KD-G521
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
ENGLISH
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA)
from any source other than AM.
The volume changes to the preset TA volume
level (see page 15).
To activate TA Standby Reception
The TP (Traffic Programme)
indicator either lights up or
flashes.
If the TP indicator lights up, TA Standby
Reception is activated.
If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
To activate TA Standby Reception, tune in to
another station providing these signals. The
TP indicator will stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favorite PTY
programme from any source other than AM.
To activate and select your favorite PTY code
for PTY Standby Reception, see page 15.
The PTY indicator either lights up or flashes.
If the PTY indicator lights up, PTY Standby
Reception is activated.
If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune in
to another station providing these signals. The
PTY indicator will stop flashing and remain lit.
To deactivate the PTY Standby Reception,
select “OFF” for the PTY code (see page 15).
The PTY indicator goes off.
! Start searching for your favorite
programme.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
Storing your favorite
programme types
You can store six favorite programme types.
Preset programme types in the number buttons
(1 to 6):
1 Select a PTY code (see page 8).
2 Select the preset number (1 – 6) you
want to store into.
Ex.: When “ROCK M” is selected
3 Repeat steps 1 and 2 to store other
PTY codes into other preset numbers.
4 Finish the procedure.
EN06-11KD-G521[EX_EU]f.indd 9EN06-11KD-G521[EX_EU]f.indd 9 8/30/05 4:24:43 PM8/30/05 4:24:43 PM

Other manuals for JVC KD-G521

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-G521 and is the answer not in the manual?

JVC KD-G521 Specifications

General IconGeneral
BrandJVC
ModelKD-G521
CategoryCar Receiver
LanguageEnglish

Related product manuals