JVC KD-R446 User Manual

13
STEERING
WHEEL
REMOTE
KD-R646 KD-R446 / KD-R445 / KD-R444
Car fuse block
Ignition switch
Recommended connection
Light blue/yellow
KD-R646 only
Vehicle-specific Wiring Harness
(separately purchased)
For more information:
Metra Electronics: www.metraonline.com
Scosche Industries: www.scosche.com
Blue/white: To amplifier
Blue: To power antenna
Make this connection if
your vehicle factory wiring
harness does not have “12 V
ignition switch” wire.
Separate red wire
Wiring connection
Signal cord (not supplied)
Remote wire
(not supplied)
Rear ground terminal
To the steering wheel
remote control adapter
Fuse (10 A)
Antenna terminal
JVC Amplifier
Factory wiring harness
(vehicle)
Vehicle dashboard
Part list for installation
( ×2 )
( ×1 )
( ×1 )
( ×1 )
( ×1 )
A Faceplate
B Mounting sleeve
C Trim plate
D Wiring harness
E Extraction key
Black: Ground
Yellow: Battery 12 V
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
Brown: Tel muting
Blue/white: Remote (200 mA max.)
Front output
Rear/subwoofer output Rear/subwoofer output
Blue: Power antenna (250 mA max.)
ENGLISH
EN_KD-R646[U]001A_f.indd 13EN_KD-R646[U]001A_f.indd 13 2/27/13 8:56:44 AM2/27/13 8:56:44 AM

JVC KD-R446 Specifications

General

Brand	JVC
Model	KD-R446
Category	Car Receiver
Language	English