Menu item
Selectable setting (Initial: [XX])
PRO EQ
For settings, ' page 23.
Audio
Fad/Bal *6*7
R6 — F6[0]: Press / to adjust the front and rear speaker output balance.
L6 — R6[0]: Press / to adjust the left and right speaker output balance.
Loud
(Loudness)
On: Boosts low and high frequencies to produce a well-balanced sound at a
low volume level.
[Off]: Cancels.
Volume Adjust
Level -5 — Level +5[Level 0]: Presets the volume adjustment level of
each source, compared to the FM volume level. Before adjustment, select
the source you want to adjust. (“FIX” appears if “FM” is selected.)
Subwoofer On/
Off
[On]: Turns on the subwoofer output.
Off: Cancels.
Subwoofer LPF *8
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
Subwoofer
Level *8
00 — 08[08]: Adjusts the subwoofer output level.
Subwoofer
Phase *8
[0 Deg] (normal)/180 Deg (reverse): Selects the subwoofer phase.
HPF
(High-pass filter)
(KD-R80BT/
KD-A65 only)
Low 100Hz/Mid 120Hz/High 150Hz: Activates the High Pass Filter. Audio
signal with frequencies lower than 100 Hz/120 Hz/150 Hz are cut off from
the front/rear speakers.
[Off]: Deactivates. (All signals are sent to the front/rear speakers.)
HPF
(High-pass filter)
(KD-R60 only)
On: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[Off]: Deactivates. (All signals are sent to the front/rear speakers.)
Beep
(Keytouch tone)
[On]/Off: Activates or deactivates the keypress tone.
Amplifier Gain
Off: Deactivates the built-in amplifier.
Low Power: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[High Power]: The maximum volume level is 50.
Tuner
SSM
For settings, ' page 7. (Displayed only when the source is “FM” or “HD
Radio”.)
Area Change
(Frequency
tuning interval)
[US]: For North/Central/South America, AM/FM intervals: 10kHz/200kHz.
EU: For any other areas, AM/FM intervals: 9kHz/50kHz.
SA: For some South American countries, AM/FM intervals: 10kHz/50kHz.
IF Band
(Intermediate
frequency band)
[Auto]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Sirius ID *9 The 12-digit SIRIUS identification number appears on the display. (Displayed
only when SIRIUS Satellite Radio is connected.)
Blend Hold *9
For settings, ' page 8. (Displayed only when the source is “HD Radio”.)
Stereo/Mono Displayed only when the source is “FM” or “HD RADIO”.
[Stereo]: Enables stereo FM reception.
Mono: Improves the FM reception but stereo effect will be lost.
Radio Timer *10
For settings, ' page 7.
*6 If you are using a two-speaker system, set the fader level to “0”.
*7 This adjustment will not affect the subwoofer output.
*8 Displayed only when <Subwoofer On/Off> is set to <On>.
*9 For KD-R80BT/KD-A65 only.
*10 Not available when JVC KT-HD300 HD Radio tuner box is connected.
Menu operations
ENGLISHޓ|
25
To Next Page
Loading...
Need help?
General
