JVC KD-R988BTS User Manual

ENGLISH
15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Auto Pairing
When you connect iPhone/iPod touch/
Android device to the USB input terminal,
pairing request (via Bluetooth) is automatically
activated.
Press
to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is
turned on.
–
[AUTO PAIRING] is set to [ON] . ( 18)
– JVC MUSIC PLAY application is installed on
the Android device
( 7) and [AUTO MODE] is
selected
( 8) .
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The symbolic button will blink in the color you have selected in
[RING COLOR] . ( 16)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 16)
During a call:
• The symbolic button stop blinking and illuminate in the color you have selected in
[RING COLOR] .
( 16)
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or .
Press
.
Reject a call
Press and hold
or .
Press and hold
.
End a call
Press and hold
or .
Press and hold
.
BLUETOOTH®
Symbolic button
JS_JVC_KD_R988BTS_K_EN_5.indd 15JS_JVC_KD_R988BTS_K_EN_5.indd 15 9/1/2016 11:05:00 AM9/1/2016 11:05:00 AM

JVC KD-R988BTS Specifications

General

Brand	JVC
Model	KD-R988BTS
Category	Car Receiver
Language	English