15
ENGLISH
• When “SCM LINK” is set to “LINK ON”, the
selected sound mode can be stored in memory
for the current source and the effect applies only
to the current source.
• When “SCM LINK” is set to “LINK OFF”, the
selected sound mode effect applies to any
source.
Recalling the sound modes
When “SCM LINK” is set to “LINK ON,”
select the source.
Each time you change the playback source, the
SCM indicator flashes on the display.
The sound mode stored in memory for the
selected source is recalled.
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 ON
BEAT Rock or disco +02 00 ON
music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
on page 16.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
pages 14. (Your adjustments will be cancelled if
another source is selected.)
EN14-16 KD-S7250/700/680[J] 26/10/01, 8:47 AM15
To Next Page
Loading...
Need help?
General
