KD-SX979R/KD-SX925R
KD-SX924R/KD-SX909R
2-1
Disassembly method
Removing the front panel unit (See Fig. 1, 2)
1.Press the Eject button to open the front panel unit
2.Push and open the right and left open/close shaft arms
outward to remove the shaft.
3.Remove the front panel unit from the same side as the
shaft was removed.
1.Remove the front panel unit.
2.Remove the two screws A attaching the front chassis
assembly.
3.Remove the four ribs a attaching the front chassis
assembly to the chassis.
Removing the front chassis assembly (See Fig. 3, 4)
Removing the bottom cover assembly
(See Fig. 5)
Turn the unit upside down,then insert and turn to
b the screwdriver to remove the bottom cover.
Fig 5
Fig 1
Eject button
Front panel unit
Fig 2
Open/close
shaft arm
Fig 3
A
a
Fig 4
a
b
b
b
To Next Page
Loading...
Need help?
General
