Firmware update
The rmware for the following products has been updated.
Models: KW-ADV65BT, KW-AV61BT, KW-AV61, KW-AV51
This update the corresponding iPhone App was added.
Update Procedure:
1. Download the rmware update le “AV61_NSX_DVD_V0002.zip” and save it on your desktop.
2. Unzip it on to your desktop.
In the unzipped folder, you will see two les “WUGFMU_XS2_51.SWP” and “VUP_info.cds”.
3. Copy these two les onto USB ash drive. Do not save them into any folder.
4. Insert USB ash drive into the DVD receiver’s USB cable. (See g1)
USB cable from the
rear of the unit
EN_KW-AV61JJW.indb 24 12/11/08 17:07
( g1)
5. On the <Setting> screen, press “System”, “down key”, and “Enter” of the System Information. (See g2)
EN_KW-AV61JJW.indb 50 12/11/08 17:07
( g2)
6. Press “Update” of the DVD Version to start update. It takes almost two minutes. (See g3)
EN_KW-AV61JJW.indb 50 12/11/08 17:07
( g3)
0001
G20.00.00
7. When the update has been completed successfully, “Update Completed” appears and the unit is reset.
8. After this update, the DVD Version in the System Information will be changed to “0002”.
Other instructions please see the instruction manual.
© 2013 JVC KENWOOD Corporation
Need help?
General
