Operation keys on source control screen
• The following explanations state the operation keys
for KW-V240BT, unless stated otherwise.
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page 8.
Touching the operation keys performs the following
actions:
6
[SSM ]*
(Hold) Presets stations automatically.
[MONO]* Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[TI]* (For FM RBDS features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into another station providing
Radio Broadcast Data System signals.
• The volume adjustment for Traffic
Information is automatically
memorized. The next time the unit
switches to Traffic Information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
TunerTuner
Presetting stations in the memory
You can preset five stations for each band.
Automatic presetting — SSM (Strong-
station Sequential Memory) (for FM only)
On the source control screen, touch as follows:
(Hold)
The local stations with the strongest signals are found
and stored automatically.
Manual presetting
1 Tune in to a station you want to preset.
2 Select a preset number to store into.
AM FM1
FM1
P1
FM1
P2
FM1
P3
FM1
P4
FM1
P5
Tuner
(Hold)
E.g. Tuner source control screen for KW-V240BT
The station selected in step 1 is stored into the
preset number [P1] to [P5] you have selected.
p
[PTY]* (For FM RBDS features)
Enters PTY search mode.
1 Touch [PTY].
2 Touch and hold a PTY code to search
for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
[SEEK]
Changes the seek mode for [
S]/[T].
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations one
after another
• MANU: Manual search
[
S]/[T]
Searches for a station.
• The search method differs according
to the selected seek mode (see above).
* Appears only when FM is selected as the source.
18 ENGLISH
ENKW-V2018STKR.indb18ENKW-V2018STKR.indb18 2017/05/259:042017/05/259:04
To Next Page
Loading...
Need help?
General
