1-2 (No.MB284)
SPECIFICATION
Design and specifications are subject to change without notice.
Amplifier Output Power 30 W per channel, min. RMS, driven into 6 Ω at 1kHz, with no more than
10% total harmonic distortion (IEC 268-3)
Input Sensitivity/Impedance (1 kHz) AUX IN:500 mV/51 kΩ
Speaker terminals 6 - 16 Ω
Phones 32 Ω - 1 kΩ
Cassette Deck Section Frequency Response 20 mW/ch output into 32 Ω
Type I (NORMAL) 63 Hz - 12 500 Hz
Wow And Flutter 0.15 % (WRMS)
CD Player CD Capacity 3 CDs
Dynamic Range 85 dB
Signal-To-Noise Ratio 85 dB
Wow And Flutter Unmeasurable
Tuner FM Tuner 87.5 MHz - 108.0 MHz
AM Tuner 530 kHz - 1710 kHz (at AM10 kHz channel space)
531 kHz - 1710 kHz (at AM9 kHz channel space)
Unit Dimensions 276 mm × 315 mm × 456 mm (W/H/D)
Mass Approx. 8 kg
Speaker Specifications
SP-MXKB2/SP-
MXKB1 (each unit)
Type 2-way bass-reflex type
Speaker Unit Woofer : 13 cm cone × 1
Tweeter : 5cm cone × 1
Power Handling Capacity 30 W
Impedance 6 Ω
Frequency Range 65 Hz - 20,000 Hz
Sound pressure level 86 dB/W·m
Dimensions 208 mm × 323 mm × 264 mm (W/H/D)
Power Specifications Power Requirements AC 110/127/220/230-240V , adjustable with voltage selector, 50/60 Hz
Power Consumption 83 W (power on mode) 13 W (in Standby mode)
To Next Page
Loading...
Need help?
General
