Need help?Do you have a question about the JVC RX-E11S and is the answer not in the manual?
General| FM Tuner | Yes |
|---|---|
| Weight | 8.6 kg |
| Preset stations quantity | 30 |
| Connectivity technology | Wired |
| Headphone outputs | 1 |
| Input impedance | 47 kΩ |
| Tuner bands | FM |
| Outputs | Headphone Output, Speaker Output |
| Radio | FM |
Details on O/I STANDBY/ON button and complete power off.
Precautions to reduce risk of electrical shocks and fire.
Guidelines for ensuring adequate airflow around the unit.
Identification of remote control buttons and functions.
Identification of front panel controls and indicators.
Explanation of receiver display symbols and indicators.
Identification of rear panel input/output terminals.
General safety and preparation steps before receiver installation.
Recommendations for receiver placement for proper operation.
Precautions for safe handling and operation of the receiver.
List of included accessories to verify upon purchase.
Instructions for adjusting the AC voltage selector to match local power.
Guide for connecting AM loop and FM antennas.
Steps for connecting front, center, surround speakers, and subwoofer.
Instructions for connecting VCR, DVD player, TV via composite/S-video.
Diagram for connecting a VCR to the receiver.
Diagram for connecting a DBS tuner to the receiver.
Guide for connecting digital audio via coaxial/optical cables.
Final step to connect the receiver to AC power.
How to turn the receiver on and put it into standby mode.
How to choose the input source for playback.
Methods for increasing or decreasing the audio volume.
How to connect and use headphones for private listening.
Setting the receiver to interpret Dolby Digital or DTS signals.
Fine-tuning the subwoofer's sound contribution.
How to quickly silence the audio output.
Controlling the brightness of the receiver's front panel display.
Setting the receiver to turn off automatically after a specified time.
How the receiver stores sound preferences for different sources.
Understanding the meaning of signal and speaker indicators on the display.
Automatic speaker setup using sound detection for optimal acoustics.
Manually setting speaker distances for accurate sound timing.
Adjusting subwoofer output, crossover, and LFE attenuation.
Setting the crossover frequency for small speakers.
Adjusting the low frequency effect attenuator for distortion.
Enabling virtual surround back effects without physical speakers.
Choosing main, sub, or both channels for Dual Mono audio sources.
Adjusting sound compression for late-night listening.
Assigning components to specific digital input terminals.
Automatically selecting surround modes based on input signals.
List of adjustable sound parameters and their functions.
Balancing the volume levels of individual speakers.
Adjusting effect levels for active Surround and DSP modes.
Enhancing the stereo sound field for Pro Logic II Music.
Modifying the tone characteristics of the center channel.
Reinforcing bass levels and adjusting bass boost.
Optimizing subwoofer phase for better bass integration.
Adjusting frequency response across multiple bands.
Reducing input signal level for high-output analog sources.
How to manually find and tune AM and FM radio stations.
Storing and recalling favorite radio stations.
Adjusting reception for clearer FM stereo or mono signals.
How the receiver simulates surround sound environments.
Overview of Dolby Digital, DTS, and Pro Logic II surround formats.
Explanation of Digital Acoustic Processor (DAP) and other DSP sound modes.
Selecting and activating various surround and DSP sound effects.
How to connect JVC components for remote control.
Wiring options for video signals between components.
Step-by-step guide for setting up AV COMPU LINK.
One-touch play, automatic source selection, and power on/off.
Using the remote to operate a connected JVC VCR.
Using the remote to operate a connected JVC TV.
Using the remote to operate a connected JVC DVD recorder or player.
Programming the remote for other brand TVs using codes.
Programming the remote for other brand VCRs using codes.
Programming the remote for other brand DBS tuners.
Programming the remote for other brand DVD players.
Diagnosing and resolving issues with power supply and standby mode.
Troubleshooting lack of sound or speaker-specific audio issues.
Identifying and fixing problems with the remote control operation.
Resolving problems related to FM/AM reception and noise.
Input/output levels, impedance, and synchronization details.
Details on output power, distortion, and speaker impedance.
Input sensitivity, impedance, S/N ratio, and frequency response.
Tuning range, sensitivity, and stereo separation data.
Tuning range for AM broadcasts.
Power requirements, consumption, dimensions, and weight.
Important warning regarding matching AC line voltage to the selector switch.
To Next Page
