4
Connect the speaker cord to the speaker
terminal.
• Each speaker can be used as front or surround speaker.
Use the 5-meter speaker cords for front speakers and
10-meter speaker cords for surround speakers.
Twist and pull the
insulation coat to
remove.
Black
5
Route the speaker cord as shown below.
• Be sure to take out the slack so that the speaker cord lies
flat.
Repeat the procedure from step
1
to assemble the other
satellite speakers.
Press and hold the
clamp.
Insert the exposed
core of the speaker
cord fully into the
terminal.
Release your finger.
Black
White
Assembly (continued)
White
– 3 –
#SP-F303-E-EN.p65 02/03/3, 2:58 pm4
To Next Page
Loading...
Need help?
General
