To Next Page

Install the battery correctly in the battery compartment. Normally the battery’s

positive polarity (+) will face up.

Remove the Plastic Strip from the Remote Control

The unit has a pre-installed

lithium CR2025 battery. Remove

the protective tab to activate the

remote control battery.

Connecting Your Soundbar to the TV

•

Operating Your Remote Control

•

Soundbar Sockets Overview

•

Quick Start Guide

Compact Soundbar

TH-D227B

Thank you for purchasing your new product.

We recommend that you spend some time reading this Quick Start

Guide in order that you fully understand how to connect your

Soundbar to your TV.

Use your Soundbar instruction manual and TV instruction manual to

choose the best way to connect your Soundbar and TV together.

Unpacking

•

Remove all packaging from the unit. Retain the packaging. If you

dispose of it please do so according to any local regulations.

To get the most from this product, you may need to buy an

Optical cable.

Battery Replacement for the Remote Control

1. Gently push the tab of the battery tray in and slide it free

from the remote control.

2. Replace with a new

battery

3. Slide the battery tray back into the remote

control.

Main Unit

Remote Control

(battery included)

Wall Bracket × 2

Screw × 4

Dowel × 4

Mains Cable

Coaxial Cable

3.5 mm to 3.5 mm

Stereo Audio Cable

Instruction Manual

Quick Start Guide

Connecting to the TV

Method 1: OPTICAL / COAXIAL Connection

Use an optical cable (not included) / coaxial cable (included) to connect the soundbar’s OPTICAL / COAXIAL socket to the OPTICAL OUT /

COAXIAL OUT socket of the external device. The simplest option is to connect your soundbar directly to your TV. If you connect the soundbar

to another external device (e.g. Blu-Ray player), you will hear the sound from that device through the soundbar.

After the connection is completed,

1. Press

on the unit or remote control to switch on the unit.

2. Press SOURCE repeatedly to select Optical or Coaxial mode.

The unit may not be able to decode all digital audio formats from the input source. In this case, the Optical/Coaxial indicator will ash in white/orange, and the unit

will prompt “Unsupported format, please refer to the Instruction Book”. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game

console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with Optical/Coaxial input.

Ensure the unit is disconnected from the mains socket before connecting it to other devices.

Optical cable (not included)

Rear View of the Soundbar

Coaxial cable (included)

1. COAXIAL Socket

2. AC~Power Socket

3. OPTICAL Socket

4. AUDIO IN Socket

5. SERVICE ONLY Socket

Blu-ray Player / DVD

Player / Recorder

Set-top Box