JVC TH-D337B Quick Start Guide

•
Connecting to the Mains Supply
Soundbar
Unwind the mains cable to its full length. Connect the end of
the mains cable to the AC~ socket at the rear of the soundbar
then connect the mains plug to the mains socket.
Subwoofer
Connect the other mains cable to the AC~ socket at the rear
of the subwoofer then connect the mains plug to the mains
socket.
• The mains cables are designed for this JVC soundbar only. DO NOT use the mains cable for other purposes. Connecting the unit to any other power source may
damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is rmly inserted into the mains socket.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
Well done, your new soundbar is now ready to use. You will nd that there are many exciting features available. To get to know all
these features, please take some time to read the instruction manual provided with your soundbar.
(QSG-TH-D337B-200611V5)
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICE ONLY AUX (BD/DVD) SUBWOOFER OUT
To the mains
socket
Rear View of the Soundbar
SUBWOOFER IN
AC~
To the mains
socket
Rear View of the Subwoofer
Connecting the Subwoofer
•
SUBWOOFER IN
AC~
COAXIAL
(TV/BD/DVD)
OPTICAL
(TV/BD/DVD)
AC~
SERVICE ONLY AUX (BD/DVD) SUBWOOFER OUT
Rear View of the Subwoofer
Rear View of the Soundbar
Use the Subwoofer cable (included) to connect the SUBWOOFER IN socket of the Subwoofer and the SUBWOOFER OUT socket of the
main unit.
• For optimal sound, always use the supplied subwoofer.
• Make sure that the Subwoofer cable is connected rmly with the main unit and subwoofer. If there is no connection between the main unit and the subwoofer, the
subwoofer indicator will ash.
Front view of the main unit
(while pressing BASS/TREBLE button)
AUX IN
Indicator
(Green)
BT
Indicator
(Blue)
OPTICAL
Indicator
(White)
COAXIAL
Indicator
(Orange)
Select Equaliser (EQ) Eect
Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote control to select the preset equaliser eects.
• When CUSTOM (Default) is selected, the COAXIAL indicator will ash (Orange) once.
• When MOVIE EQ is selected, the OPTICAL indicator will ash (White) once.
• When MUSIC EQ is selected, the BT indicator will ash (Blue) once.
• While the unit is in COAXIAL, OPTICAL, or AUDIO IN mode, it will automatically switch into MOVIE EQ eect.
• While the unit is in Bluetooth mode, it will automatically switch into MUSIC EQ eect.
Adjusting the Bass/Treble Level in CUSTOM EQ mode
1. Make sure that the EQ is set to CUSTOM mode.
2. Press BASS/TREBLE on the remote control. The AUX IN, BT, OPTICAL and COAXIAL indicators
will ash once.
3. Press VOL+/VOL– to adjust the bass/treble level.
4. After about 5 seconds, the AUX IN, BT, OPTICAL and COAXIAL indicators will ash once again to
indicate that the unit has exited BASS/TREBLE setup.
5. You may now press VOL+/VOL– to adjust volume.
• While adjusting the bass/treble level, the status indicator ashes quickly.
• While the BASS/TREBLE reaches its maximum or minimum level, the status will ash once if
you press VOL+/VOL– again.
The table below also shows the EQ mode supporting bass/treble adjustment.
EQ Mode Adjusting Bass Level? Adjusting Treble Level?
Custom
3 3
Movie N/A N/A
Music N/A N/A
•
EQ and Bass/Treble Level Settings
Subwoofer Cable (included)
Visit Partmaster.co.uk today for the easiest way to buy electrical spares
and accessories. With over 1 million spares and accessories available we
can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800
3456 (UK customers only). Calls charged at National Rate.
TH-D337B_QSG_Final200611V5.indd 2 15/06/2020 16:59

JVC TH-D337B Specifications

General

Brand	JVC
Model	TH-D337B
Category	Speaker System
Language	English