EasyManuals Logo
Home>JVC>Stereo System>UX-5000

JVC UX-5000 User Manual

JVC UX-5000
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
16
English
Troubleshooting
If you are having a problem with your System, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your
dealer, for service.
Symptom Possible Cause Action
No sound is heard. Connections are incorrect, or loose.
Headphones are connected.
Check all connections and make cor-
rections. (See pages 4 - 5.)
Disconnect the headphones.
Poor radio reception The antenna is disconnected.
The AM Loop Antenna is too close
to the System.
The FM Wire Antenna is not prop-
erly extended and positioned.
Reconnect the antenna securely.
Change the position and direction of
the AM Loop Antenna.
Extend FM Wire Antenna to the best
reception position.
The CD skips. The CD is dirty or scratched. Clean or replace the CD.
The CD does not play. The CD is upside down. Put the CD in with the label side up.
Unable to operate the Remote Control. The path between the Remote Con-
trol and the sensor on the Unit is
blocked
The batteries have lost their charge.
Remove the obstruction.
Replace the batteries.
Operations are disabled. The built-in microprocessor has mal-
functioned due to external electrical
interference.
Unplug the System then plug it back in
Ux5000-e.fm Page 16 Wednesday, April 8, 1998 10:51 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UX-5000 and is the answer not in the manual?

JVC UX-5000 Specifications

General IconGeneral
BrandJVC
ModelUX-5000
CategoryStereo System
LanguageEnglish

Related product manuals