Kärcher K 3 How To Connect

HOW TO CONNECT THE K 3 POWER CONTROL
HIGH PRESSURE HOSE
Tips to help you get up and running with the K 3 Power Control electric pressure washer.
Connecting the High Pressure Hose
The connections on the high pressure hose are not perfectly round – if you look carefully you'll see two flat areas on each
connection. Correctly aligning those flat areas to the corresponding flat areas on the spray gun and pressure washer ensures
proper assembly and maximum performance from your K 3 Power Control pressure washer.
1. Locate the flat areas on the high pressure
hose connectors
(indicated here with red arrows)
2. Locate the flat areas on spray gun connection
(indicated again with red arrows)

Kärcher K 3 Specifications

General

Form factor	Upright
Hose length	6 m
Power source	Electric
Maximum flow rate	380 l/h
Working pressure (max)	120 bar
Working pressure (min)	20 bar
Maximum input water temperature	40 °C
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	1600 W
Surface cleaner	-

Weight and Dimensions

Depth	275 mm
Width	279 mm
Height	803 mm
Weight	5800 g