Keeley GC-2 User Manual

BASIC CONTROLS:
• True Bypass Footswitch – Turns the effect on or off. If Blue LED
is lit at the top of the pedal, the controls are active
• COMPRESSION Knob (Ratio) – Use this knob to set the
compression ratio above the threshold. 1:1 represents no
compression, or no reduction above threshold. Innity:1
represents a hard limiter, or zero volume increase over threshold.
• THRESHOLD Knob – Use this knob to set the Threshold,
or trigger point, of compression. Lower settings will cause
compression to occur more often, higher levels will require you
to play harder before compression begins.
• GAIN Knob (Output Level) – Adjust this knob to increase
output level, to compensate for compression reduction, or to
push higher than unity gain or boost.
• Threshold Indicator – This is the LED in the center of the pedal.
This dual color LED will be lit green if there is no compression,
or red when the threshold has been met and the pedal is applying
gain limiting (compression).

Keeley GC-2 Specifications

General

Brand	Keeley
Model	GC-2
Category	Amplifier
Language	English