Keithley DAQ6510 Quick Start Guide

To connect the power cord:
1. Connect the supplied power cord to the AC receptacle on the
rear panel.
2. Connect the power cord to a grounded AC outlet.
To turn a DAQ6510 on:
1. Disconnect any devices under test (DUTs) from the DAQ6510.
2. Press and hold the POWER switch for two seconds to turn
the instrument on. The indicator next to the POWER switch
shows amber in the off state and green in the on state when
connected to the power source.
The instrument displays a status bar as the instrument powers
on. The Home screen is displayed when the power on is
complete.
To turn a DAQ6510 off:
1. Press and hold the front-panel POWER switch to turn off
the instrument.

Keithley DAQ6510 Specifications

General

Brand	Keithley
Model	DAQ6510
Category	Multimeter
Language	English