Kenmore 117-95 User Manual

For the Lifetime
of every Kenmore
Sears Guarantees
an Efficient Repair
and Parts Service
Take advantage of this service for
your convenience and satisfaction.
You can obtain this service thru any
Sears' Store, Retail or Mail Orde r.
Important:
Be sure to state model
number
of machine. Tilt head and
look for name plate attached to
front of bed plate flange (immedi-
ately beneath bed plate).
SEARS, ROEBUCK AND CO .
The Oblect of This Book
-is to provide you with complete directions for operating
the Kenmore Rotary Sewing Machine. We are extremely
anxious that your investment in this machine returns the ut-
most
in satisfactory service. Therefore, you are urged to read
this book carefully and thoroughly, in order to familiarize
yourself with the
ope ration of the Kenmore Rotary, even
though you may be accustomed to using some other sewing
machine.
Please pay particular attention to the instructions
on
pages 10, 11, 12, 13 and 28.
•
To Mount Sewing Machine Head
On Cabinet
Mount head on head hinges (which will be found perman-
ently attached to the cabinet) by inserting the round shank
of the head hinge into lug holes on the bed of machine (see
Fig. 2), then tip head back and tighten head hi nge set screws
(see Fig. 2).
Pull bushing up on motor cord as near to the motor as pos·
sible and slip motor cord into slot at edge of bed plate and
push bushing back into hole in bed plate (see Fig. 30), there-
by retaining cord in bed plate.
Be sure the motor pulley is ad justed so it centers on the
hand wheel for proper drive; next, connect the three-contact
connector plug to motor terminal (Fig.28); next unwind the
long
wall plug cord which is inside the cabinet and connect
it to any regular electrical outlet.
On e

Kenmore 117-95 Specifications

General

Brand	Kenmore
Model	117-95
Category	Sewing Machine
Language	English