1
30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
P/N 318201612 (0610) Rev. F
Printed in United States
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
***IMPORTANT: Cabinet and countertop
width should match the cutout width.
Shave Raised Edge
To Clear
Space for
31 5/16"
(81cm)
Wide
Cooktop Rim.
Grounded Junction Box or Wall Outlet Should Be
Located 8" to 17" (20.3 - 43.2 cm) From Right
Cabinet and 2" to 4" (5.1-10.2 cm) From Floor
24" Min.
(61 cm) Min.
30" Min.
(76.2 cm) Min.
13"
(33 cm)
Locate Cabinet Doors 1" (2.5
cm) Min. From Cutout Opening
Approx. 1 7/8"
(4.8 cm)
18" Min.
(45.7 cm) Min.
30" Min. (see Note 3)
(76.2 cm) Min. (See Note 3)
1 ½" Max.
(3.8 cm Max.)
These surfaces should be flat
& leveled (hatched area).
Do not install the unit in the cabinet before reading next two pages.
A. HEIGHT (Under
Cooktop)
B. WIDTH
C. COOKTOP
WIDTH
D. TOTAL DEPTH
TO FRONT OF
RANGE
E. CUTOUT WIDTH***
(Countertop and
cabinet)
F. CUTOUT DEPTH G. HEIGHT OF
COUNTERTOP
35 5/8" (90.5 cm) - 30" 31 5/16" 28 5/16" (71,9 cm) 30±1/16" 21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
backguard
36 5/8" (93 cm) Max.
36 5/8" (93 cm) (76,2 cm) (79.5 cm) (76,2±0,15 cm) 35 5/8" (90.5 cm) Min.
To Next Page
Need help?
General