Do you have a question about the Kenwood DP-R895 and is the answer not in the manual?
dynamic range | More than 94 dB |
---|---|
total harmonic distortion + noise | Less than 0.007 % (at 1 kHz) |
number of channels | 2 channels |
channel separation | More than 90 dB (at 1 kHz) |
playing rotation | 200 rpm - 500 rpm |
frequency response | 4 Hz-20 kHz, ±1.0 dB |
signal to noise ratio | More than 96 dB |
output level/impedance | 2.0 V/3.3 kΩ |
---|---|
D/A conversion | Bit Oversampling 8 fs (352.8 kHz) |
power consumption | low |
width | 440 mm |
---|---|
height | 128 mm |
depth | 392 mm |
weight | 5.0 kg |