Do you have a question about the Kenwood DPX-3070 and is the answer not in the manual?
frequency response | 10Hz~20kHz (±1dB) |
---|---|
total harmonic distortion | 0.01% (1kHz) |
S/N ratio | 100dB (1kHz) |
frequency range | 87.5MHz~108.0MHz (50kHz) |
---|---|
channel space selection | 50kHz/200kHz |
usable sensitivity | 9.3dBf (0.8µV/75Ω) |
maximum power | 50W x 4 |
---|---|
full bandwidth power | 22W x 4 (at less than 1% THD) |
preout level | 1800mV/10kΩ |
tape speed | 4.76cm/sec. |
---|---|
frequency response | 20Hz~20kHz (±1dB) |
wow & flutter | 0.1% (WRMS) |
operating voltage | 14.4V (11V~16V) |
---|---|
current consumption | 10A |
installation size | 178 x 100 x 155 (mm) |