Need help?Do you have a question about the Kenwood DPX-MP4070 and is the answer not in the manual?
FM Tuner Section| frequency range | 87.9 MHz – 107.9 MHz |
|---|---|
| usable sensitivity | 9.3dBf (0.8 µV/75 Ω) |
| quieting sensitivity | 15.2dBf (1.6 µV/75 Ω) |
| frequency response | 30 Hz – 15 kHz |
| signal to noise ratio | 70 dB |
| selectivity | ≥ 80 dB |
| stereo separation | 30 dB |
AM Tuner Section| frequency range | 530 kHz – 1700 kHz |
|---|---|
| usable sensitivity | 28 dBµV (25 µV) |
Cassette Player Section| tape speed | 4.76 cm/sec. |
|---|---|
| wow & flutter | 0.1 % |
| frequency response | 40 Hz – 20 kHz (±3 dB) |
| separation | 35 dB |
| signal to noise ratio (Dolby NR Off) | 50 dB |
| signal to noise ratio (Dolby B NR On) | 60 dB |
CD Player Section| laser diode | GaAlAs |
|---|---|
| digital filter | 8 Times Over Sampling |
| d/a converter | 1 Bit |
| spindle speed | 500 – 200 rpm (CLV) |
| wow & flutter | Below Measurable Limit |
| frequency response | 10 Hz – 20 kHz |
| total harmonic distortion | 0.01 % |
| signal to noise ratio | 100 dB (1 kHz) |
| dynamic range | 93 dB |
| channel separation | 85 dB |
| mp3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
| wma decode | Compliant with Windows Media Audio |
Audio Section| maximum output power | 50 W × 4 |
|---|---|
| full bandwidth power | 22 W × 4 |
| preout level / load | 1800mV/10kΩ |
| preout impedance | ≤ 600 Ω |
Auxiliary Input| frequency response | 20 Hz – 20 kHz |
|---|---|
| input maximum voltage | 1200 mV |
| input impedance | 100 kΩ |
General| operating voltage | 14.4 V |
|---|---|
| current consumption | 10 A |
| installation size | 178 × 100 × 155 mm |
| weight | 2.3 kg (5.1 lbs) |
To Next Page
