Kenwood KAC-M3004 User Manual

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new power
amplifier.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you call upon you
r Kenwood dealer for information or service on the product.
Model
KAC-M3004 Serial number
US Residence Only
Register Online
Register your Kenwood product at ww
w.Kenwoodusa.com
B5A-0393-00/00 (KV)© 2015 JVC KENWOOD Corporation
KAC-M3004
COMPACT 4 CHANNEL DIGITAL AMPLIFIER
INSTRUCTION MANUAL
AMPLIFICATEUR COMPACT 4 CANAUX NUMÉRIQUE
MODE D’EMPLOI
AMPLIFICADOR DIGITAL COMPACTO DE 4 CANALES
MANUAL DE INSTRUCCIONES
KAC-M3004KEnFrEs00.indd1 15/01/1510:33

Kenwood KAC-M3004 Specifications

General

rated power output (Stereo 4 Ω)	50 W × 4 (20 Hz – 20 kHz, ≤ 1.0 % THD)
rated power output (Stereo 2 Ω)	75 W × 4 (1 kHz, ≤ 1.0 % THD)
rated power output (Bridged 4 Ω)	150 W × 2 (1 kHz, ≤ 1.0 % THD)
speaker impedance	4 Ω (2 Ω to 8 Ω allowable)
frequency response	20 Hz – 20 kHz (+0, –3 dB)
input sensitivity (RCA)	0.2 V – 5.0 V
signal to noise ratio	87 dB
input impedance	10 kΩ
low pass filter frequency	50 Hz – 200 Hz (variable)
high pass filter frequency	50 Hz – 200 Hz (variable)
operating voltage	14.4 V (11 – 16 V allowable)
current consumption	21 A
dimensions (W × H × D)	165 × 45 × 99 mm / 6-1/2 × 1-3/4 × 3-7/8 inch
weight	0.76 kg (1.7 lbs)
RMS Watts per channel @ 4 ohms, ≤ 1% THD+N	50 W × 4
signal to noise ratio (Reference: 1Watt into 4 ohms)	74 dBA