Using the KAT002ME Adaptor
This KAT002ME adaptor enables you to fit Bar Connection System attachments to a
Kitchen Machine (KVC/KVL) featuring the Twist Connection System .
Refer to your main kitchen machine and individual attachment instruction manual for safety
warnings, additional usage and cleaning instructions.
For more information visit www.kenwoodworld.com/twist
1 2
3
Using the Adaptor
1 Lift off the slow speed outlet cover by
pressing the top and lifting off
1
.
2 With the adaptor in the position shown (K
logo on top), locate to the slow speed outlet
and rotate to lock in place
2
. The locking
screw should be facing forward.
• Note: Before attempting to fit an attachment,
check inside the adaptor to ensure the
locking screw is unwound far enough to
allow the attachment to be inserted.
3 Insert the attachment (turning both ways until
it locates), then turn the locking screw
3
to
lock in position .
4 Refer to the individual attachment manual for
usage instructions.
5 Reverse the above procedure to remove the
attachment from the adaptor.
Cleaning
• Always remove the attachment from the
adaptor before cleaning the parts.
• The adaptor should only be wiped over with
a damp cloth and should not be immersed in
water. Do not place the adaptor in the
dishwasher.
English
To Next Page
Need help?
General
