Do you have a question about the Kenwood KD-291R and is the answer not in the manual?
belt-drive system | DC Servo Motor |
---|---|
speeds | 33-1/3 and 45 rpm |
tonearm | Integrated Straight Tonearm |
cartridge type | VM type (V-76) |
---|---|
stylus | N-76 with 0.6 mil Diamond |
frequency response | 20 Hz to 20, 000 Hz |
output voltage | 2.5 mV (1, 000 Hz, 5.0 cm/sec) |
---|---|
load impedance | 47 kΩ |
compliance | 4x10[-6] cm/dyne |
power consumption | 4W |
---|---|
dimensions (W x H x D with Dust Cover) | 440 mm x 106 mm x 390 mm |
dimensions (W x H x D without Dust Cover) | 440 mm x 92 mm x 348 mm |
weight | 2.9 Kg |